NR-REG error log entries and recommended actions

Last Updated : Jul 02, 2015 |
Table 1: NR-REG error log entries

Error type

AUX data

Associated test

Alarm level

On/off board

Command to resolve the error

1

Min

Off

257

WRN

Off

enable nr-registration network-region

Notes:

  1. Error type 1: The percentage of hyperactive gateways in a network region exceeds the administered percentage.

    1. Enter disable nr-registration network-region so that gateways and IP phones in the specified network region will register to a Survivable Remote Server. The registration of the IP network endpoints to a server is being disabled, not the IP network region itself. The use of this command is a temporary recovery action, not a corrective action.

    2. After the network problem has been corrected, enter enable nr-registration network-region to enable registration of the IP network endpoints to a server. This will allow them to re-register with the main server depending upon the administered recovery rule specified on the change media-gateway screen.

  2. Error type 257: Registrations for the network region are currently disabled. Enter enable nr-registration network-region to enable registration of the ip-network endpoints to a server.