ERR-LOG error log entries

Last Updated : Jul 08, 2015 |

Error type

Aux data

Associated test

Alarm level

On or Off Board

Command to resolve the error

510

See Note

none

none

none

Notes:

  1. Error type 510: An inconsistency was detected in either the Alarm Log, the Hardware Error Log, or the Software Error Log. The system attempts to recover the logs but, depending on the extent of the corruption, some or all entries in the logs may be lost. Any alarms that were active at the time of this error have been cleared. There is no associated test for this error.

    The Aux Data value indicates when the inconsistency was found:

    0

    During a periodic audit of the Error Log

    1

    After an extended reboot

    2

    After a reboot

    3

    After a Reset System 3 (Cold_1)

    4

    After a Level-3 System Reset (Cold_1)

    4

    After a Reset System 2 (Cold_2)

    8

    After a Level-2 System Reset (Cold_2)

    16

    After a Level-1 System Reset (Warm Start)

    100

    After an internal software audit

    2500

    After a single-process (MDM) restart