Configuring the server configuration profiles

Last Updated : Oct 06, 2020 |
Prolog information
Metadata
Keywords:
  1. Log in to the Avaya Session Border Controller for Enterprise server as the administrator.
  2. Click Configuration ProfilesServer Configuration.
  3. Click Add and assign a name to the Server Configuration Profiles.
    For example: lab3-sm and ms-edge.
  4. On the General tab, do the following:
    1. Server Type: Call Server
    2. SIP Domain: Aura Presence/IM domain
    3. IP Address / FQDN: IP Address of the Session Manager Asset Interface
    4. Port: 5061
    5. Transport: TLS
    6. TLS Client Profile: TLS Client Profile to the Session Manager
  5. Click Next.
    STEP RESULT:
    Authentication is disabled.
  6. Click Next.
    STEP RESULT:
    Enable Heartbeat is disabled.
  7. Click Next.
  8. In the Advanced tab, do the following:
    1. Enable DoS Protection: disabled
    2. Enable Grooming: enabled
    3. Interworking Profile: Session Manager Interworking Profile.
      For example, lab3-sm.
    4. Signaling Manipulation Script: none
    5. Securable: disabled
    6. Enable FGDN: disabled
  9. Click Finish to commit the changes.
  10. Similarly, click Add again to create the Server Configuration Profile for the Microsoft Edge.
  11. Assign a name to the profile ms-edge.
  12. On the General tab, do the following:
    1. Server Type: Trunk Server
    2. SIP Domain: Microsoft domain
    3. IP Address / FQDN: IP Address of the Edge server
    4. Port: 5061
    5. Transport: TLS
    6. TLS Client Profile: TLS Client Profile to the Edge
  13. Click Next.
    STEP RESULT:
    Authentication is disabled.
  14. Click Next.
    STEP RESULT:
    Enable Heartbeat is disabled.
  15. Click Next.
  16. On the Advanced tab, set the following:
    1. Enable DoS Protection: disabled
    2. Enable Grooming: enabled
    3. Interworking Profile: Session Manager Interworking Profile.
      For example, ms-edge.
    4. Signaling Manipulation Script: none
    5. Securable: disabled
    6. Enable FGDN: disabled
  17. Click Finish to commit the changes.
    ADDITIONAL INFORMATION: