Configuring a vector for the Web Voice Transfer VDN

Last Updated : Mar 09, 2017 |
Prolog information
Metadata
Keywords:
Use this procedure to configure a vector for the Web Voice Transfer VDN.
  1. Using SSH client, connect to the Communication Manager System Access Terminal (SAT) interface.
  2. Run change vector n.
    ADDITIONAL INFORMATION:
    n is the number that you entered in the Destination field of the VECTOR DIRECTORY NUMBER screen while creating the Web Voice Transfer VDN.
  3. On page 1 of the CALL VECTOR screen, perform the following steps:
    1. In the Name field, enter the name of the vector as WebVoiceXfer.
      ADDITIONAL INFORMATION:
      This standard name makes maintenance and troubleshooting easier.
    2. Enter the details required from line 01 to line 02 as shown in the following screen:
      ADDITIONAL INFORMATION:
      Important:
      The number xxxx in the route-to command must be the same number that you configured while configuring the Transfer to Service Implicit User in System Manager and Avaya Control Manager.
  4. Save the settings.