Configuring an Implicit User Route Point for inbound Web Video

Last Updated : Feb 09, 2018 |
Prolog information
Metadata
Keywords:
Use this procedure to create an Implicit User Route Point for Inbound Web Video using Avaya Control Manager.
Before you begin
Ensure that Avaya Oceana® Cluster 1 is in the running and accepting state.
  1. On the Avaya Control Manager webpage, click ConfigurationAvaya Oceana™Route Points.
  2. On the Route Points List page, click Add.
  3. To add the Inbound Video Implicit User, perform the following steps:
    1. In the Type field, select Implicit User.
    2. In the Sub Type field, select Ingress.
    3. In the Name field, enter a name for the Implicit User.
    4. In the Address field, enter a number based on the pattern that you specified while configuring the Avaya Breeze® platform Implicit User Profile in System Manager.
      ADDITIONAL INFORMATION:
      For example, if you specified the pattern as 999x, then enter a number such as 9990, 9992, or 9999. This number must correspond with the number used to trigger the Engagement Designer Web Video workflow.
    5. Click Save.