Configuring server certificates for Avaya Breeze® platform nodes

Last Updated : Nov 18, 2022 |
Prolog information
Metadata
Keywords:
Configure the Avaya Breeze® platform nodes of Avaya Oceana® cluster to trust your server certificates.
Add the trusted certificates to all nodes of the Avaya Oceana® cluster running Authorization Service.
Before you begin
Add the server certificates to the solution.
  1. On the System Manager web console, click ServicesInventoryManage Elements.
  2. On the Manage Elements page, select the System Manager check box, and click More ActionsManage Trusted Certificates.
  3. On the Manage Trusted Certificates page, click Add.
  4. On the Add Trusted Certificate page, perform the following steps:
    1. Click Import file from file.
    2. Browse to the root certificate.
    3. Click Retrieve Certificate.
    4. Click Commit.
  5. Repeat step 3 and step 4 for intermediate and LDAP certificates.
  6. Click Done.
  7. On the System Manager web console, click ElementsAvaya Breeze®Cluster Administration.
  8. On the Cluster Administration page, select Avaya Oceana® Cluster 2.
  9. Change the state to DENY.
  10. Go back to Manage Elements.
  11. Select Avaya Oceana® Cluster 2 node 1.
  12. Repeat step 2 to step 6 for node 1.
  13. Select Avaya Oceana® Cluster 2 node 2.
  14. Repeat step 2 to step 6 for node 2.
    ADDITIONAL INFORMATION:
    After you complete the configuration, you must reboot Avaya Oceana® Cluster 2. When the servers are online, change the state of Avaya Oceana® Cluster 2 to Accept mode.
    Note:
    If you are replacing a certificate, you must delete all instances of that certificate from System Manager and the Avaya Oceana® Cluster 2 servers before rebooting the Avaya Oceana® Cluster 2 nodes.