This screen displays only when Administer Timers is enabled. This screen does not display ISDN trunk group information for trunks of Group Typecpe or sip.
Note:
If the ISDN trunk group has a Carrier Medium value of H.323, or if the trunk group has BRI members, then this page cannot be administered. In these cases, an error message displays when you attempt to submit the screen.
Caution:
Customers: Do not change fields on this page without assistance from Avaya or your network service provider.
Programmed Dial Pause (msec)
Valid Entry
Usage
100 to 25500 in increments of 100
The exact duration of the pause used during abbreviated dialing, ARS outpulsing, and terminal dialing operations. This timer is administrable for all outgoing and two-way trunk groups. All central office (CO) media module that accept administrable timers accept this timer.
END TO END SIGNALING
Pause (msec)
Available only if the Trunk Type is blank.
Valid Entry
Usage
20 to 2550 in increments of 10
The interval (pause) between DTMF tones sent from a hybrid telephone. All CO, DIOD, and tie media module that accept administrable timers accept this timer.
Tone (msec)
Available only if the Trunk Type is blank.
Valid Entry
Usage
20 to 2550 in increments of 10
The duration of the DTMF tone sent when a button on a hybrid telephone is pressed. All CO, DIOD, and tie media module that accept administrable timers accept this timer.
