This screen downloads firmware to multiple stations of the same telephone type, either 2420 or 2410 DCP telephones. Downloads firmware to as many as 1000 stations per download schedule. You can schedule a specific time for the download, or you can administer the download to run immediately.
Example command: change firmware station-download
Beginning Station
The first extension number in the range of telephones used to download the firmware. Up to 1000 stations can be included in a scheduled download. Accepts up to 16 digits.
Continue Daily Until Completed
Enables or disables the execution of a firmware download each day at the scheduled time until all specified telephones have received the firmware.
Download Set Type
Valid Entry
Usage
2410 DCP
2420 DCP
The set type of DCP telephones to which firmware is to be downloaded.
Download Station Type
Type of station to which the firmware is to be downloaded.
Ending Station
The last extension number in the range of telephones used to download firmware. Up to 1000 stations can be included in a scheduled download. Accepts up to eight digits.
Schedule Download
Enables or disables a request to schedule a time for a firmware download to multiple DCP stations.
Source File
The name of the file used to retrieve the firmware download. Accepts up to 32 alphanumeric characters.
Start Date/Time
Available only if Schedule Download is enabled.
Valid Entry
Usage
mm, dd, yyyy; hh, mm
The month, day, year, and time for the firmware download to begin.
Stop Date/Time
Available only if Schedule Download is enabled.
Valid Entry
Usage
mm, dd, yyyy; hh, mm
The month, day, year, and time for the firmware download to end.
