Find answers to your technical questions and learn how to use our products
Search suggestions:
This screen administers the tone characteristics that parties on a call hear under various circumstances.
With the Multinational Locations feature enabled, tone generation can be administered per location, rather than system-wide.
Valid Entry
Usage
y
The switch primary dial tone is changed to a continuous 440Hz-17 tone.
n
A customized tone defaults to the Base Tone Generation Set.
The secondary local telephone company central office dial tone is changed to a continuous 440Hz-17 tone.
1 to 50
The country code that identifies the base tone generation set to be used.
Displays the number of each tone cadence step.
50 to 12750
The duration of this step in the tone sequence. Values are in increments of 50.
The number of the cadence step for this goto command.
silence
No tone. A final step of silence with an infinite duration will be added internally to any tone sequence that does not end in a goto.
goto
Repeats all or part of the sequence, beginning at the specified cadence step.
350/-17.25
350+425/-4.0
350+440/-13.75
375+425/-15.0
404/-11.0
404/-16.0
404+425/-11.0
404+450/-11.0
425/-4.0
425/-11.0
425/-17.25
440/-17.25
440+480/-19.0
450/-10
480/-17.25
480+620/-24.0
525/-11.0
620/-17.25
697/-8.5
770/-8.5
852/-8.5
941/-8.5
1000/0.0
1000/+3.0
1004/0.0
1004/-16.0
1209/-7.5
1336/-7.5
1400/-11.0
1477/-7.5
1633/-7.5
2025/-12.1
2100/-12.1
2225/-12.1
2804/-16.0
Specifies the frequency and level of the tone.
1-call-wait
2-call-wait
3-call-wait
busy
busy-verify
call-wait-ringback
conference
confirmation
disable-dial
hold
hold-recall
immed-ringback
intercept
intrusion
mntr/rec-warning
PBX-dial
recall-dial
recall-dont-ans
redirect
reorder
rep-confirmation
reset-shift
ringback
secondary-dial
special-dial
whisper-page
zip
Indicates which of the individually administrable tones is modified.
Customization of busy-verify will also change the warning tone.
warning
Previous Topic
Next Topic
