Location Parameters: page 2

Last Updated : Jun 12, 2014 |

LOSS PLANS

2-Party Loss Plan/Tone Loss Plan

This field provides the default values for digital loss plan and for n-party conference loss.

Valid entry

Usage

1 to 25

A country code for the location.

Customize

Enables customization on the corresponding loss plan table. When Customize is enabled for the End-to-End total loss (dB) in a n-party conference, values can be changed by the administrator. When Customize is disabled, the End-to-End total loss (dB) in a n-party conference values are reset to the values that they would have had under the 2 Party Loss Plan. Available only if Digital Loss Plan Modification is enabled for the system.

End-to-End total loss (dB) in a n-party conference

Valid Entry

Usage

0 to 99

Provides total loss for a conference call with the designated number of parties.

The higher the number listed for a call with a fixed number of parties, the more loss Communication Manager adds into a conference call with that number of parties; therefore, the conference call is quieter.
Note:

The End-to-End total loss for multi-party conference calls that is administered for this field is not always applied to a specific call.

Inter-location Loss Group

When inserting loss for a call, the server treats parties on the call who are in separate locations as if the location with the most parties were connected by an equal number of IP tie trunks as there are parties at other locations. The field specifies the digital loss group number that is used by these virtual IP tie trunks. The system displays this field only if the Multinational Locations feature is enabled.

Valid entry

Usage

1 to 19

The digital loss group number to use on inter-location calls involving this location. The default value is 18.

Line Load Control Restriction

Restriction Level

Use Restriction Level field to impose restrictions on certain calls during critical scenarios or when experiencing a high volume of incoming calls.

Valid Entry

Usage

0

Feature not active (no restrictions). This is the default.

2

Restrict stations with a COR assigned to LLC levels 2, 3, and 4.

3

Restrict stations with a COR assigned to LLC levels 3, and 4.

4

Restrict stations with a COR assigned to LLC level 4.

Feature Access code Authentication Required

Use Feature Access Code Authentication Required field to control, if the user needs to be authenticated before the system accepts or denies change in locations LLC level.

Valid Entry

Description

N (no)

Select this option if you don't require authentication for accessing or modifying the LLC Restriction level. This is default.

y (yes)

Select this option if you want authentication to be required when accessing or changing the LLC Restriction level. This means that users will need to provide valid authentication credentials before making changes to the LLC restrictions.