Time of Day Routing Plan

Last Updated : Oct 29, 2012 |

This screen is used to set up Time of Day Routing Plans.

AAR and ARS calls can be routed based on the time of day each call is made.
Up to eight Time of Day Routing Plans can be designed, each scheduled to change up to six times a day for each day in the week.
The Time of Day Routing Plan PGN# is matched with the PGN# field on the Partition Routing Table for the correct route pattern.

Available only if Automatic Route Selection (ARS) or Private Networking, AAR/ARS Partitioning, and Time of Day Routing are enabled for the system.

Example command: change time-of-day n, where n is the time of day routing plans.

Act Time

Valid Entry	Usage
00:00 to 23:59	Specifies the time of day the route pattern, identified by PGN#, begins. Time is represented using a 24 hour clock. List times for the same day in increasing order. There must be at least one entry for each day.

PGN #

The route pattern for the activation time listed. The PGN must match a previously-administered PGN and route pattern on the Partition Routing Table. There must be at least one entry for each day.

Valid Entry	Usage
1 to 8	The route pattern range when SA9050 is inactive.
1 to 32	The route pattern range when SA9050 is active. The range depends on the type of Communication Manager template. The default value is 8. (For more information on how SA9050 changes capacities, see Avaya Aura® Communication Manager System Capacities Table.)