Deactivating EMU

Last Updated : Oct 30, 2012 |
Prolog information
Metadata
Keywords:
  1. At the visited telephone, enter the EMU deactivation FAC.
    ADDITIONAL INFORMATION:
    You must enter the EMU deactivation FAC of the server in the location where you are dialing from.
  2. Enter the extension number of the primary telephone.
  3. Enter the security code of the visited telephone.
    ADDITIONAL INFORMATION:
    If the visited telephone does not deactivate, the telephone remains in the visited state.
  4. To deactivate the visited telephone you can perform a busy-out, release busy-out at the visited server.
  5. Enter the EMU feature deactivation code and the security code of the visited telephone at the home server location.
  6. Press the <mute>RESET function on the IP telephone.
    ADDITIONAL INFORMATION:
    Note:
    Anytime the visited telephone performs a reset, the EMU registration is deactivated.
  7. Unplug the visited DCP set for a period of one minute
    ADDITIONAL INFORMATION:
    Unplugging or disconnecting a 4600 series set will not deactivate the set.
Related links
End-user procedures for Enterprise Mobility User