In the navigation pane, click Server ConfigurationNetwork Configuration.
Configure the following eth1 fields:
ADDITIONAL INFORMATION:
IPv4 Address: The IP address of the Ethernet connection
Mask: The subnetwork mask of the IP address
Functional Assignment: Out-of-Band Management
If the Communication Manager instance is a duplex configuration, configure the eth2 fields.
Verify that you can gain access to Communication Manager using the Out-of-Band Ethernet interface.
ADDITIONAL INFORMATION:
Important:
You must be able to gain access to Communication Manager using the Out of Band Management Ethernet interface before you perform the next step.
Add a static route between the Out of Band Management interface and the enterprise network.
ADDITIONAL INFORMATION:
You must ensure that you add a static route between the Out of Band Management interface and the enterprise network to restrict access. For more information, see Add a static route between the Out of Band Management interface and the enterprise network.
From the Restrict Management traffic to Out-of-Band interface is currently drop-down list, select enabled.
ADDITIONAL INFORMATION:
Note:
Restrict Management traffic to Out-of-Band interface is set to enabled. Restrict Management traffic to Out-of-Band will restrict traffic on ports 80, 443, 22, 2222, 5022, 23, 5023, 161, and 162 to the management interface only.
