SIP trunks do not need any special configuration for Communication Manager to send the Malicious Call Trace notification
Use Steps 1 to 5 for ISDN-PRI connections and Steps 6 to 10 for ISDN-BRI trunk connections, as appropriate for your network. Communication Manager does not send MCT notification over ISDN/H.323 trunks.
In the Communication Manager CLI, enter add ds1 n, where n is the number of the DS1 media module that you want to add.
In the Country Protocol field, do one of the following:
If the DS1 is connected to a public network in Australia, type 2.
If the DS1 is connected to a public network that supports the ETSI Malicious Call Trace Identification (MCID) service according to EN 300 130, type etsi.
If the DS1 is connected to a private network of servers that run Communication Manager, type 1.
In the Peer Protocol field, type q-sig, if the DS1 is connected to a private network of servers that run Communication Manager.
ADDITIONAL INFORMATION:
The system displays the Peer Protocol field when the:
Signaling Mode field is set to
Connect field is set to
Interface field is set to either
To administer other fields on the DS1 Media Module screen, see Administering Avaya Aura®Communication Manager.
Press Enter to save your changes.
Enter change bri-trunk-board.
In the Cntry/Peer Protocol field, type one of the following: * 2 if the ISDN-BRI media module is connected to a public network in Australia.
ADDITIONAL INFORMATION:
* etsi if the ISDN-BRI media module is connected to a public network that supports the ETSI Malicious Call Trace Identification (MCID) service according to EN 300 130.
In the Interface field, type either peer-master or peer-slave, if the ISDN-BRI media module is connected to a private network of servers that run Communication Manager.
To administer other fields on the ISDN-BRI Trunk Media Module screen, see Administering Avaya Aura®Communication Manager.
Press Enter to save your changes.
ADDITIONAL INFORMATION:
Note:
You must set the Supplementary Service Protocol field on the ISDN Trunk Group screen to
