In the Voice Paging Timeout field, type the maximum number of seconds that a page can last.
In the Port field for Zone 1, type the port number that is assigned to the auxiliary media module to this zone.
In the Voice Paging - TAC field, type the value for Trunk Access Code (TAC) that users dial to page this zone.
In the Voice Paging - COR field, type the class of restriction (COR) for this zone.
ADDITIONAL INFORMATION:
You can assign different CORs to different zones.
In the Location field on the Zone 1 row, type a descriptive name for the zone.
ADDITIONAL INFORMATION:
Use this name to help you remember the corresponding physical location.
Repeat steps 4 through 6 for each zone.
In the ALL row of the Voice Paging- TAC field, type the value for Trunk Access Code (TAC) that users dial to page all zones.
In the All row of the Voice Paging - COR field, type the class of restriction (COR) for all zones.
ADDITIONAL INFORMATION:
When you complete this row, you allow users to page all zones at once. You do not have to assign a port to this row.
Press Enter to save your changes.
ADDITIONAL INFORMATION:
You can integrate loudspeaker voice paging and call parking. This is called deluxe paging. You enable deluxe paging by entering
Note:
To set up paging on an H.248 gateway, connect the paging system to a port on an MM711 and administer the port as an analog station on the Station screen. No entries on the Loudspeaker Paging screen are required.
