System ManagerGeographic Redundancy deployment does not support some of the CS 1000 functionality. For more information, see Limitations to the CS 1000 functionality support on System Manager.
Procedure
On the Security Configuration page, click Full security configuration and Security Configuration.
The system displays the FQDN validation page.
Confirm that the (TLAN) IP address and FQDN values are correct, and click Next.
The system displays the Select server type page.
Click Member server and click Next.
The system displays the Enter server information page.
Enter the (TLAN) IP address of the primary security server, and click Next.
The system displays the Verify primary security server fingerprint page.
Verify that the FQDN and fingerprint information for the primary security server is valid, and enter the following details in appropriate fields:
The primary security server user ID, that is, a UCM user ID with System Administrator role.
The primary security server password of the user.
Click Next.
The system displays the Enter certificate information page.
Enter information in appropriate fields.
Click Finish.
The system displays the Security Configuration Progress page.
To complete the configuration process, click Restart. to restart the web server.
The Security Configuration Progress page confirms that the server is restarting.
The restart process might take up to 5 minutes to complete. You can then establish a new session and log on with your security administrator credentials. The registration process requires configuration of the primary System Manager information on the element. The secondary server information is provided to the element when the element registers with the primary server.
