General
Name |
Description |
Name |
The name of the IP Office device. The name must only contain lowercase and uppercase alphabets, numbers from 0 to 9, commas, hyphens, and underscores. |
Description |
The description of the IP Office device. |
Node |
The IP address can be in the IPv4 or IPv6 format. The host name or the IP address of the IP Office device. |
Device Type |
The type of the IP Office device. The options are IP Office and B5800. |
Device Version |
The version of the IP Office device. |
Service Login |
The login name to access the IP Office device. The default is BranchAdmin. |
Service Password |
The password to access the IP Office device. |
Confirm Service Password |
The service password that you retype for confirmation. |
For IP Office releases earlier than 9.1, the default service login for IP Office is SMGRB5800Admin. After you upgrade IP Office from Release 9.0 to 9.1 or later, you can use the same login name, SMGRB5800Admin. The account remains active.
However, the system creates a new account, BranchAdmin. The configuration of the BranchAdmin account is the same as the SMGRB5800Admin account. The new account also becomes active.
In IP Office Release 9.1 or later, if you reset the security setting, the system deletes the SMGRB5800Admin account and adds the BranchAdmin account that remains disabled. You must activate the account by accessing the IP Office security setting offline.
Also, if you add the new IP Office Release 9.1 or later in System Manager by running Initial Configuration Utility (ICU) on IP Office, the default account, BranchAdmin, will be available. The account becomes active.
