The name of the profile.

A brief description of the profile.

The SNMP protocol type.

The user name as defined in the element.

The authentication protocol used to authenticate the source of traffic from SNMP V3 users. The possible values are:

• MD5

  The default is MD5.

• SHA

• None

Authorization Type applies only to the SNMP V3 protocol.

The password to authenticate the user. The password must contain at least eight characters.

The SNMP V3 protocol authentication password that you retype for confirmation.

The encryption policy for an SNMP V3 user. The possible values are:

• AES: For SNMP-based communication.

• AES128: For SNMP-based communication.

• DES: For SNMP-based communication.

  The default is DES.

• None: Does not encrypt traffic for this user.

Set Privacy Type only for an SNMP V3 user.

The password used to enable the DES or AES encryption. DES passwords must contain at least eight characters.

The privacy password that you retype for confirmation.

The privileges that determine the operations that you can perform on MIBs.

• None

  The default is None.

• Read/Write: To perform GET and SET operations.

• Read: To perform only the GET operation.

The time in milliseconds for which the element waits for a response from the device being polled during discovery.

The number of times that the element polls a device without receiving a response before timing out.

The name of the profile.

A brief description of the profile.

The SNMP protocol type.

The read community of the device.

Read Community applies only to the SNMP V1 protocol.

The write community of the device.

Write Community applies only to the SNMP V1 protocol.

The time in milliseconds for which the element waits for a response from the device that the element polls.

The number of times that the element polls a device and fails to receive a response. After the retries, the element times out.

Adds or edits the SNMP access profile depending on the option you select.

Returns to the previous page.