Enabling and disabling FTP on System Manager

Last Updated : May 24, 2017 |

About this task

You must enable FTP on System Manager only to use System Manager as a local software library for upgrading Media Gateway and Media Modules.

Note:

When the upgrade is complete, disable FTP only to re-enable when you need.

Before you begin

Start an SSH session.

Procedure

  1. Log on to the System Manager web console with administrator privilege credentials.
  2. To enable the FTP server, do the following:
    1. At the prompt, type sh/opt/vsp/SDM_FTP_Patch/Setup.sh.
    2. Type the sdmuser password and press Enter.

    You can now use the FTP library to save the software or firmware.

  3. To disable the FTP server, type sh/opt/vsp/SDM_FTP_Patch/Setup.sh stop.