By using the Network Routing Policy (NRP) group, you can add or remove Communication Manager within the NRP group. Communication Manager of the NRP group can then create Location entries in Session Manager for the field Controlled by this CM server for that network region.
After you add Communication Manager to the NRP group, you can set the Controlled by this CM server field to Yes or No.
If you specify the IP Network Region for the field Controlled by this CM server value to Yes, the Session Manager location will generate with IP Network Region, Name and IP Network Map linked for that IP Network Region.
On the IP Network Region page, you can perform the following:
In the Details column, you can either show or hide the IP Network Maps.
You can edit the Name and Controlled by this CM server fields for the IP Network Region that you have selected.
Note:
If Communication Manager 1, Communication Manager 2, and Communication Manager 3 are in an NRP group, and you set the Controlled by this CM Server field to Yes for the IP Network Region X for Communication Manager 1.
Where IP Network Region X can be any IP Network Region other than IP Network Region 1, as IP Network Region 1 is an exception.
Important:
You cannot set the Controlled by this CM Server field to Yes for Communication Manager 2, and Communication Manager 3 in IP Network Region X because the these two Communication Manager instances are a part of the same NRP group.
