Administering CDR for a data module

Last Updated : Sep 29, 2023 |
Prolog information
Metadata
Keywords:
  1. Type change data-module n, where n is the number of the data module for which you want to administer CDR. Press Enter.
    STEP RESULT:
    The system displays the Data Module screen.
    The system displays the Ext and Name display-only fields in the Abbreviated Dialing area. The fields contain the extension number and the name of the users who have associated data extension buttons, and who share this data module.
  2. In the BCC field, perform one of the following actions:
    • Type 1 if the speed is 56 kbps.
    • Type 2, 3 or 4 if the speed is 64 kbps.
    ADDITIONAL INFORMATION:
    The system compares the speed setting that you assign here with the speed setting in an associated routing pattern. The system compares the two speed settings when calls that attempt to use the data module are incomplete.
    The system displays the BCC field if the ISDN-PRI field or the ISDN-PRI Trunk field on the Optional Features screen is set to
  3. The Capabilities area contains three fields.
    • In the Configuration field, perform one of the following actions:
      • Type y if you want to view and change options from originating or receiving DTEs, such as non intelligent terminals.
      • Type n If you do not want view and change options from intelligent devices such as computers.
      The system displays the Configuration field only when the KYBD Dialing field on the Data Module screen is set to
    • In the KYBD Dialing field, perform one of the following actions:
      • Type y if you want the users to dial calls from a keyboard, and to allow the data module endpoint to transmit and receive text during call origination or call termination.
        If you type
      • Type n if you do not want the users to dial calls from a keyboard.
        If you type
        If you type
    • In the Busy Out field, perform one of the following actions:
      • Type y if you want the system to place the data line circuit (DLC) port in a busyout state so calls do not terminate at the data terminal equipment (DTE) when the DTE control lead to the DLC drops. Use this option for DTEs that are members of a hunt group.
      • Type n if you want the system to keep the DLC port out of a busyout state when the DTE control lead to the DLC drops.
  4. The Circuit Switched Data Attributes area contains information that is used with 7500 data modules and World Class BRI data modules.
    ADDITIONAL INFORMATION:
    The fields in the Circuit Switched Data Attributes area contain default information. The default information is for modem pooling conversion resource insertion when the endpoint does not support the data query capability or the administered connections. The information in the fields has no significance for data modules that provide data query, such as Avaya-supported ISDN-BRI data modules. Use the system default settings for Avaya ISDN-BRI data modules or World Class ISDN-BRI data modules.
    • In the Default Duplex field, perform one of the following actions:
      • Type full to allow simultaneous, two-way transmission, which is duplex mode.
      • Type half to allow only one transmission direction at a time, which is half-duplex mode.
    • In the Default Mode field, perform one of the following actions:
      • Type sync for synchronous data mode.
      • Type async for asynchronous data mode.
    • In the Default Speed field, type the data rate.
  5. The system displays the Connected To field, when the Type field contains either dpm or data-line.
    ADDITIONAL INFORMATION:
    In the Connected To field, perform one of the following actions:
    • Type dte if the Asynchronous Data Unit (ADU) is connected to a data terminal equipment (DTE).
    • Type isn if the ADU is connected to an information systems network.
  6. In the COR field, type the number of the Class of Restriction (COR) for this data module.
    ADDITIONAL INFORMATION:
    Valid entries are 0 through 95.
  7. In the COS field, type the number of the Class of Service (COS) for this data module.
    ADDITIONAL INFORMATION:
    Valid entries are 1 through 15.
  8. The Data Module Capabilities area contains three fields with information for the 7500 data modules and the World Class BRI (WCBRI) data modules.
    • The Default Data Applications field identifies the mode that the system uses to originate calls when the calling parameters do not specify the mode. The system also uses the mode to terminate trunk calls that do not have administered connections, or for which the bearer capability is unspecified. For more information, see the Uniform Dial Plan feature.
      In the Default Data Applications field, perform one of the following actions:
      • Type M0 to specify mode 0. Use this option for a WCBRI endpoint that the system uses as an administered connection.
      • Type M1 to specify mode 1.
      • Type M2_A to specify mode 2 asynchronous.
      • Type M2_S to specify mode 2 synchronous.
      • Type M3/2 to specify mode 3/2 adaptable.
    • In the Default ITC field, perform one of the following actions:
      • Type restricted for a WCBRI endpoint that is an administered connection.
      • Type unrestricted for a WCBRI endpoint that is not an administered connection.
    • The display-only MM Complex Voice Ext field contains the number of the associated telephone in the multimedia complex. The system displays the MM Complex Voice Ext field only when the Multimedia field is set to
      The field is blank until you type the data module extension in the MM Complex Data Ext field on the Station screen. When you type the data module extension in the MM Complex Data Ext field on the Station screen, the system associates the numbers in the MM Complex Data Ext and the MM Complex Voice Ext fields as two parts of a one-number complex. The one-number complex is the extension of the telephone.
    ADDITIONAL INFORMATION:
    The system displays the data module extension in the display-only Data Extension field.
  9. In the ITC field, perform one of the following actions:
    • Type restricted if the data module can send bits at speeds less than or equal to 56 kbps. If you type
    • or
A restricted transmission facility enforces ones density digital transmission. Ones density digital transmission is a sequence of eight digital zeroes that the firmware on the DS1 port board converts to a sequence of seven zeroes and a digital 1.
  • Type unrestricted if the data module can send bits at a speed up to, and including, 64 kbps. If you type
  • to complete a call from this data module endpoint. The value
    • An unrestricted transmission facility does not enforce ones density digital transmission. The DS1 port board firmware does not convert the digital information.
    The system does not display the ITC field for voice-only stations or BRI stations. The ITC field applies only when the Comm Type field on the Trunk Group screen, that the system uses for an outbound call, is set to
  • . The ITC field specifies the type of transmission facilities that an ISDN call uses when a call originates from this data module endpoint.
  • In the List1 field in the Abbreviated Dialing area, perform one of the following actions:
    • Leave the field blank if you do not want the data module to have an abbreviated dialing list.
    • Type e if you want the data module to have an enhanced abbreviated dialing list.
    • Type g if you want the data module to have a group list.
    • If you type
    • Type p if you want the data module to have a personal list.
    • If you type a
    • Type s if you want the data module to have a system abbreviated dialing list.
  • In the Name field, perform one of the following actions:
    • Type the name of the user who is associated with the data module.
    • Leave the field blank.
  • The Options area contains six fields.
    • In the Answer Text field, perform one of the following actions:
      • Type y if you want the system to allow text feedback to the DTE when a user answers a call or the system disconnects a call. The text feedback includes both DLC-generated text and system-generated text.
      • Type n if you want the system to disable text feedback to the DTE when a user answers a call or the system disconnects a call, and when the DTE that answers a call is a computer or an intelligent device. The system still generates the text, but the DLC disallow the text to be delivered to the DTE.
      The Answer Text field applies to the following call messages:
      • Incoming
      • Answered
      • Disconnected
      • Disconnected other end
      The system displays the Answer Text field only if the KBDY Dialing field on the Data Module screen is set to
    • In the Connected Indication field, perform one of the following actions:
      • Type y if you want the system to generate a connected message to the DTE when the system establishes a connection.
      • Type n if you do not want the system to generate a connected message to the DTE when the system establishes a connection.
      The system displays the Connected Indication field only if the KBDY Dialing field on the Data Module screen is set to y. If the Connected Indication field is set to n, DLC provides the connection indication when the DLC activates the EIA 232C control lead.
    • In the Dial Echoing field, perform one of the following actions:
      • Type y if you want the system to echo characters back to the DTE.
      • Type n if you do not want the system to echo characters back to the DTE and when an intelligent device provides keyboard dialing.
      The system displays the Dial Echoing field only if the KBDY Dialing field on the Data Module screen is set to
    • In the Disconnect Sequence field, perform one of the following actions:
      • Type long-break if you want a break that is greater than 2 seconds.
      • Type two-breaks if you want a break that is less than 1 second.
      The system displays the Disconnect Sequence field only if the KBDY Dialing field on the Data Module screen is set to y.
    • In the Parity field, type one of the following types of parity:
      • even
      • odd
      • mark
      • space
      The system displays the Parity field only if the KBDY Dialing field on the Data Module screen is set to
    • In the Permit Mismatch field, perform one of the following actions:
      • Type y if you want the DLC to operate at the highest selected speed, which is a higher rate than that of the far end data module.
      • Type n if you do not want DLC to operate at the highest selected speed.
      The Permit Mismatch field contains information with which an EIA interface can operate at a rate that differs from the rate that is agreed upon during the data module handshake. The rate that is agreed upon during the data module handshake is always the highest compatible rate among the speeds that each data module reports.
      The information in the Permit Mismatch field eliminates the need to change the DTE or DLC speed whenever someone, or something, places a call to or from endpoints that operate at a different speed.
      When the Permit Mismatch field is set to
  • In the Port field, type the appropriate values from the table.
    ADDITIONAL INFORMATION:
    Port field values
    Characters
    Description
    Value
    1-2
    cabinet number
    01 through 44 (For DEFINITY R configurations)
    01 through 03 (For DEFINITY SI configurations)
    01 through 64 (For IP-PNC)
    3
    carrier
    A through E
    4-5
    slot number
    0 through 20
    6-7
    circuit number
    01 through 04 (x.25 circuit pack)
    01 through 31 (DEFINITY SI, IP-PNC (tdm, pdm) configurations)
    01 through 16 (ppp for IP-PNC
    01 through 08 (system-port for IP-PNC)
    17/33 (Ethernet on IP-PNC)
    x
    Administration without Hardware
    If the Secondary data module? field, contains an
  • in the Port field. A Port field set to
    		•
  • The Speeds area contains information about the operating speeds of the data module.
    • In the Low field, perform one of the following actions:
      • Type y if you want the data line circuit to operate at a speed of 0 to 1800 bps.
      • Type n if the KYBD Dialing field on the Data Module screen is set to
    • In the 300, 1200, 2400, 4800, 9600, and 19200 fields, perform one of the following actions:
      • Type y if you want the DLC to operate at the speed.
        You can choose any of the speeds for the DLC. The DLC matches the speed for the duration of the call.
        If you select multiple speeds, you must also set the Autoadjust field to
      • Type n if you do not want the DLC to operate at the speed.
      In the Autoadjust field, perform one of the following actions:
      • Type y if you want the DLC port to automatically adjust to the operating speed and the parity of the DTE to which the DLC port connects.
      • Type n if you do not want the DLC port to automatically adjust to the operating speed and the parity of the DTE to which the DLC port connects.
      The system displays the Autoadjust field when the KYBD Dialing field on the Data Module screen is set to
  • In the Special Dialing Option field, perform one of the following actions:
    • Leave the field blank if you do not want the data module to have special dialing
    • Type hot-line if you want the data module to have hot-line dialing.
      If you type
    • Type default if you want the data module to have default dialing.
      If you type
  • In the TN field, type the tenant partition number of the data module.
    ADDITIONAL INFORMATION:
    Valid entries are 1 through 100.
  • In the Type field, perform one of the following actions:
    • Type 7500 to assign a 7500 data module.
      The 7500 data module supports:
      • Automatic TEI
      • B-channel, maintenance and management messaging
      • Service Profile Identifier (SPID) initialization capabilities
      BRI voice endpoints, BRI data endpoints, or both BRI voice and BRI data endpoints are assigned to either the ISDN-BRI - 4-wire S/T-NT Interface circuit pack or the ISDN-BRI - 2-wire U circuit pack. Each circuit pack supports up to 12 ports.
      BRI provides a multipoint capability. Therefore, you can administer more than one ISDN endpoint, either a voice endpoint or a data endpoint, on one port.
      For BRI, telephones with SPID initialization capabilities support multipoint administration. Multipoint administration is supported only if no endpoint that is administered on the same port is a fixed tie endpoint, and no station on the same port has B-channel data capability. The system restricts multipoint administration to two endpoints per port.
    • Type data-line to assign a data line data module.
      Use the Data Line Data Module (DLDM) screen to assign ports on the Data Line (DLC) circuit pack for EIA 232C devices to connect to the system. The DLC, with a companion ADU, provides a less expensive data interface to the system than other asynchronous DCP data modules.
      The DLC supports asynchronous transmissions at speeds of low, and of 300, 1200, 2400, 4800, 9600, and 19200 bps over two-pair, full-duplex lines. These lines can have different lengths, depending on the transmission speed and the wire gauge.
      The DLC has eight ports. The connection from the port to the EIA device is direct, which means that no multiplexing is involved. A single port of the DLC is equivalent in functionality to a data module and a digital line port. The system displays DLC as a data module to DTE and as a digital line port to the server that runs Communication Manager.
      The DLC connects the following EIA 232C equipment to the system:
      • Printers
      • Non intelligent data terminals
      • Intelligent terminals and personal computers (PCs)
      • Host computers
      • Information Systems Network (ISN), RS-232C local area networks (LANs), or other data switches
    • To assigns a DCE interface for processor/trunk data modules, type pdm.
      Use the Processor/Trunk Data Module screen to assign Modular Processor Data Modules (MPDMs) and Modular Trunk Data Modules (MTDMs). Use one screen to assign MPDMs (700D), 7400B, 7400D or 8400B Data Module. Use another screen for MTDMs (700B, 700C, 700E, 7400A). You must complete one screen for each MPDM, 7400B, 7400D, 8400B or MTDM.
      The MPDM, 7400B, or 8400B Data Module provides a Data Communications Equipment (DCE) interface. Use the interface for a connection to equipment such as a data terminal, call detail recording (CDR) output device, on-premises administration terminal, Message Server, Property Management System (PMS), Communication Manager Messaging, and host computers. The MPDM, 7400B, or 8400B Data Module also provides a Digital Communications Protocol (DCP) interface to the digital switch. Note that DCE is the equipment on the network side of a communications link that provides all the functions that are required to make the binary serial data from the source or transmitter compatible with the communications channel.
      The MTDM provides an EIA DTE interface for connection to off-premises private line trunk facilities, or a switched telecommunications network and a DCP interface for connection to the digital switch. Note that DTE is the equipment that comprises the endpoints in a connection over a data circuit. For example, in a connection between a data terminal and a host computer, the terminal, the host, and their associated modems or data modules make up the DTE. The MTDM or the 7400A Data Module can also serve as part of a conversion resource for combined modem pooling.
  • Press Enter to save your changes.
    • Related links
    Call Detail Recording administration