Internal Auto-Answer

Last Updated : May 25, 2023 |

This function is also known as handsfree auto-answer. It sets the user's extension to automatically connect internal calls after a single tone. This function should only be used on phones that support handsfree operation.

Details

  • Action: Emulation | Internal Auto-Answer.

  • Action Data: Optional.

    • If left blank this function acts as described above for internal auto-answer.

    • FF can be entered. In that case the button will enable/disable headset force feed operation for external calls. In this mode, when headset mode is selected but the phone is idle, an incoming external call will cause a single tone and then be automatically connected. This operation is only supported on Avaya phones with a fixed HEADSET button. Ring delay is applied if set on the appearance button receiving the call before the call is auto-connected.  

  • Default Label: HFAns or Auto Answer.

  • Toggles: Yes.

  • Status Indication: Required.

    Status

    1400, 1600, 9400, 9500

    9608, 9611, J100

    9621, 9641

    T-Series,

    On

    Green on

    Green on

    Green

    On

    Off

    Off

    Off

    Grey

    Off

  • User Admin: Yes.

  • Phone Support: Note that support for particular phone models is also dependent on the system software level.

    • 9400 Series, 9500 Series, 9600 Series, and J100 Series.

    • 1400 Series and 1600 Series.

    • M-Series and T-Series.