Configuration Settings
SMTP can be used as the method of sending system alarms. The email destination is set as part of the email alarms configured in System | System Events | Alarms.
SMTP can be used with Embedded Voicemail for Voicemail Email. The voicemail destination is set by the user's Voicemail Email address.
Field |
Description |
Server Address |
Default = Blank This field sets the IP address of the SMTP server being used to forward SNMP alarms sent by email. |
Port |
Default = 25. Range = 0 to 65534. This field set the destination port on the SMTP server. |
Email From Address |
Default = Blank This field set the sender email address. Depending of the requirements of the SMTP server this may need to be a valid email address hosted by that server. Otherwise the SMTP email server may need to be configured to support SMTP relay. |
Use STARTTLS |
Default = Off. (Release 9.0.3). Select this field to enable TLS/SSL encryption. Encryption allows voicemail-to-email integration with hosted email providers that use secure transport. |
Server Requires Authentication |
Default = Off Select if the SMTP server requires authentication. When selected, the following fields become available |
User Name |
Default = Blank Sets the user name for SMTP server authentication. |
Password |
Default = Blank Sets the password for SMTP server authentication. |
Use Challenge Response Authentication (CRAM-MD5) |
Default = Off. Selected if the SMTP server uses CRAM-MD5. |
