The first source is called the System Source. This source is numbered source 1. The possible options for this source are:
Setting |
Description |
WAV |
Use the HoldMusic.wav file. The IP Office loads the file using TFTP, or you can directly add the file using the embedded file manager. |
WAV (restart) |
Identical to WAV except that for each new listener, the file plays from the beginning.
|
External |
Applicable to IP500 V2 systems. Use the audio source connected to the Audio port on the control unit. |
Tone |
Use a double beep tone: 425Hz, 02./0.2/0.2/3.4 seconds on/off.
|
