Each hunt group can be configured with its own SIP URI information. For calls received on a SIP line where any of the line's SIP URI fields are set to Use Internal Data, if the call is presented to the hunt group that data is taken from these settings.
This form is hidden if there are no system multi-site network lines in the configuration or no SIP lines with a URI set to Use Internal Data.
These settings can be edited online. Changes to these settings do not require a reboot of the system.
Field |
Description |
SIP Name |
Default = Blank on Voicemail tab/Extension number on other tabs. This value is used for fields, other the Contact header, where the SIP URI entry being used has its Contact field set to Use Internal Data.
On incoming calls, if the Local URI is set to Use Internal Data, the system can potentially match the received R-URI or From header value to a user and/or group SIP Name. This requires the SIP URIs Incoming Group to match a Incoming Call Route with the same Line Group ID and a . (period) destination. |
SIP Display Name (Alias) |
Default = Blank on Voicemail tab/Name on other tabs. The value from this field is used when the Display field of the SIP URI being used is set to Use Internal Data. |
Contact |
Default = Blank on Voicemail tab/Extension number on other tabs. The value is used for the Contact header when the Contact field of the SIP URI being used for a SIP call is set to Use Internal Data. |
Anonymous |
Default = On on Voicemail tab/Off on other tabs. If the From field in the SIP URI is set to Use Internal Data, selecting this option inserts Anonymous into that field rather than the SIP Name set above. See Anonymous SIP Calls. |
