Auto-Create Extension

Default = Off.

If enabled, subscription of a handset with the Avaya Wireless DECT system causes the auto-creation of a matching numbered extension within the system configuration if one does not already exist. This setting is not supported on systems configured to use WebLM server licensing.

• For security, auto-create is automatically disabled after 24 hours.

Auto-Create User

Default = Off.

This option is only usable if Auto-Create Extension is also enabled. If enabled, subscription of a handset with the DECT system causes the auto-creation of a matching user within the system configuration if one does not already exist.

• For security, auto-create is automatically disabled after 24 hours.

Enable DHCP Support

Default = Off

This option is not used with Avaya Wireless DECT.

Boot File

Default = ADMM_RFP_1_0_0.tftp. Range = Up to 31 characters.

This option is not used with Avaya Wireless DECT.

ADMM MAC Address

Default = 00:00:00:00:00:00

This option is not used with Avaya Wireless DECT.

VLAN ID

Default = Blank. Range = 0 to 4095.

This option is not used with Avaya Wireless DECT.

Base Station Address List

Default = Empty

This option is not used with Avaya Wireless DECT.

Enable Provisioning

This option can be used with Avaya Wireless DECT systems. It allows the setting of several values in the IP Office system configuration that previously needed to be set separately in the master base stations configuration.

The use of provisioning requires the system security settings to include an IPDECT Group. For full details, see the Deploying Avaya Wireless DECT with IP Office manual.

SARI/PARK

Default = 0

Enter the PARK (Portable Access Rights Key) license key of the Avaya Wireless DECT system.

Subscriptions

Default = Disabled

Select the method of subscription supported for handsets subscribing to the Avaya Wireless DECT system. The options are:

• Disabled

  Disables subscription of handsets.

• Auto-Create

  Allow anonymous subscription of handsets. Once subscribed, the handset is assigned a temporary extension number. That extension number can be confirmed by dialing *#. A new extension number can be specified by dialing <Extension Number>*<Login Code>#. The Auto-Create Extension and Auto-Create User settings above should also be enabled. While configured to this mode, Manager will not allow the manual addition of new IP DECT extensions.

• Preconfigured

  Allow subscription only against existing IP DECT extensions records in the system configuration. The handset IPEI number is used to match the subscribing handset to a system extension.

Authentication Code

Default = Blank.

Set an authentication code that DECT handset users should enter when subscribing to the DECT system.

Enable Resiliency Default = Off.

Enables resiliency on the IP DECT Line. To configure resiliency, you must also configure an IP Office with Backs up my IP Dect Phones set to On.

Status Enquiry Period

Default = 30 seconds.

The period between successive verifications on the H.323 channel. The smaller the interval, the faster the IP DECT system recognizes that IP Office is down.

Prioritize Primary

Default = Off.

Set to On for automatic failover recovery. When on, the Avaya Wireless DECT system switches automatically from the backup IP Office to the "primary" IP Office.

Only available when Enable Provisioning is set to On.

Supervision Timeout

Default = 120 seconds.

The period of time the Avaya Wireless DECT system will wait between attempts to switch from the backup IP Office to its "primary" IP Office.

Only available when Enable Provisioning is set to On.