Adding Blank Buttons
This tab is used to set and lock the user's programmable button set. When locked, the user cannot use Admin or Admin1 buttons on their phone to override any button set by their user rights.
Buttons not set through the user rights can be set through the user's own settings. When Apply user rights value is selected, the tab operates in the same manner as the User | Button Programming tab.
These settings are mergeable. Changes to these settings do not require a reboot of the system.
For a Server Edition network, these settings can be configured at the network level and are then automatically replicated in the configuration of all systems in the network. They can only be seen and edited at the individual system configuration level if record consolidation is switched off.
There are scenarios where users are able to program their own buttons but you may want to force certain buttons to be blank. This can be done through the user's associated User Rights as follows:
Assign the action Emulation | Inspect to the button. This action has no specific function. Enter some spaces as the button label.
When pressed by the user, this button will not perform any action. However it cannot be overridden by the user.
