This tab allows settings for individual channels within the trunk to be adjusted. This tab is not available for trunks sets to ETSI or QSIG mode.
These settings must be edited offline. To enter offline editing, select .
Field |
Description |
Channel |
Allocated by the system. |
Incoming Group ID |
Default = 0, Range 0 to 99999. The Incoming Group ID to which a line belongs is used to match it to incoming call routes in the system configuration. The matching incoming call route is then used to route incoming calls. The same ID can be used for multiple lines. |
Outgoing Group ID |
Default = 1. Range 0 to 99999. When a short code specifies a number to dial, the IP Office will seize an available line from those available with a matching Outgoing Group ID. In a Server Edition/Select network, the Outgoing Group ID used for lines to a system must be unique within the network. Reserved Group ID Numbers
0 - In a Server Edition/Select network, the ID 0 cannot be used. 90000 - 99999 - Reserved for system use (not enforced).
96666 - Use for ACO lines. 98888 - For IP Office deployed in an Enterprise Branch environment, reserved for the SM line. 99001 - 99148 - In a Server Edition/Select network, reserved for the IP Office lines from the primary and secondary servers to each expansion system in the network. 99998 - In a Server Edition/Select network, reserved for the IP Office lines to the secondary server. 99999 - In a Server Edition/Select network, reserved for the IP Office lines to the primary server. |
Line Appearance ID |
Default = Auto-assigned. Range = 2 to 9 digits. Used for configuring Line Appearances with button programming. The line appearance ID must be unique and not match any extension number. |
Direction |
Default = Both Directions The direction of calls on the channel. The options are: Incoming, Outgoing, Both Directions. |
Bearer |
Default = Any The type of traffic carried by the channel. The options are: Voice, Data, Any. |
Service |
Default = None. If the line provider is set to AT&T, select the type of service provided by the channel. The options are:
Call by Call SDN (inc GSDN) MegaCom 800 MegaCom Wats Accunet ILDS I800 ETN Private Line AT&T Multiquest For other providers, the service options are None or No Service. |
Admin |
Default = Out of Service Used to indicate the channel status. The options are: In Service, Out of Service, Maintenance. |
Tx Gain |
Default = 0dB The transmit gain in dB |
Rx Gain |
Default = 0dB The receive gain in dB. |
