Creating a Branch Session Manager server profile

Last Updated : Dec 13, 2023 |

About this task

Creating a Remote Branch Office server to route messages to the Branch Session Manager.

Procedure

  1. Log in to the EMS web interface with administrator credentials.
  2. On the Device menu, select the Avaya SBC instance.
  3. In the navigation pane, click Services > SIP Servers.

    The EMS server displays the SIP Servers page.

  4. In the application pane, click Add.

    The EMS server displays the Add Server Configuration Profile window.

  5. In the Profile Name field, enter a name for the server profile.
  6. Click Next.

    The EMS server displays the Add Server Configuration Profile window.

  7. In the Server Type field, select Remote Branch Office.
  8. Select the Verify TLS Common Name check box.
  9. In the TLS Common Name field, common name must be unique for each remote Branch Server.

    You must create an end point certificate with a unique common name for each remote Branch Server.

  10. In the IP Address/Supported FQDNs field, enter the IP address of the Branch Session Manager.
  11. In the Transport field, select TLS.
  12. In the Port field, enter the TLS port number.

    The default port number for TLS is 5061.

  13. Click Next.

    The EMS server displays the Add SIP Server Profile – Authentication window.

  14. If you use server authentication, type the required information in the Add Server Configuration Profile – Authentication window.
  15. Click Next.

    The EMS server displays the Add SIP Server Profile - Advanced window.

  16. In the Interworking Profile field, select the interworking profile.
  17. Select the Enable Grooming check box.
  18. Leave the remaining fields to the default values.
  19. Click Finish.
Related information
Server configuration profile field descriptions