Checklist for configuring Avaya SBC for SIPREC

Last Updated : Jul 13, 2020 |

Task

Reference

Configure one or more recording servers.

Configuring a recording server

Create a routing profile for the Recording Server.

Adding a routing profile

Configure one or more recording profiles and assigning the recording profile to a routing profile.

Configuring one or more recording profiles and assigning the recording profile to a routing profile

Enable UCID for the signaling rules used on the Session Manager endpoint policy group.

Enabling UCID for the signaling rules used on the Session Manager endpoint policy group

Create a Session Policy for the recorder, enable the recording server, and attach the recording profile.

Creating a new session policy for the Recording Server

Create an application rule for the Recording Server.

Creating a new Application Rule

Create a media rule with appropriate codec prioritization for the Recording Server.

Note:

For SRTP calls, ensure interworking is enabled.

Avaya SBC does not support SIPREC video for this release. If video is enabled at Communication Manager for video calls, and if monitoring of stations is enabled, video time division multiplexing features might have impact on IPv6.

Creating a media rule for the Recording Server

Create an endpoint policy group for the Recording Server.

Creating a new endpoint policy group

Ensure that you provision enough RTP ports for the media interface towards the enterprise network.

Note:

For example, if you require 1000 ports for calls, you must provision 2000 ports for RTCP-used even ports and RTCP-used odd ports. To add SIPREC, you must provision another 4000 ports inside and outside RTP to the Recording Server.

Create a session flow for the Recording Server.

If you have a hairpin between remote worker and trunk, ensure that you create three session flows:

  • Session Flow 1 between trunk and Session Manager1.

  • Session Flow 2 between Session Manager2 and remote worker.

  • Session Flow 3 for hairpin flow between trunk and remote worker.

Adding a session flow for the Recording Server

Create server flow for each Recording Server.

For remote worker configuration, create a server flow for remote worker. Ensure that remote worker A1 interface is set as the received interface, and Avaya SBC interface towards recorder is set as the signaling interface for the server flow.

Creating a server flow