SIP tab on the VoIP Connections page field descriptions (view only)

Last Updated : Jun 05, 2026 |

Use this tab to view the Session Initiation Protocol (SIP) connections on the Experience Portal system.

Note:
The following options are available in EPM only if the media server is MPP:

  • Maximum Simultaneous Calls

  • Inbound Calls Allowed

  • Outbound Calls Allowed

Tip:

To sort the connections by any column, click the up arrow (sort ascending) or down arrow (sort descending) in the column header.

Column

Description

Zones filter icon

Zones filter icon

To filter zones, click this icon located at the right side of the page. The system opens the Zone Filter window for selecting one or more zones.

Zone

The name of the zone within which the respective SIP connection is configured.

Name

The unique identifier for this SIP connection on the Experience Portal system.

Click the name to open the View SIP Connection page.

Enable

The options are:

  • Yes: This connection is available for use by the Experience Portal system.

  • No: This connection is disabled.

Proxy Transport

The IP Protocol used by the SIP connection.

The options are:

  • TCP

  • TLS

Proxy/DNS Server Address

The address of the proxy server or the DNS server.

This must be a valid network address in the form of a fully qualified hostname or an IP address.

Proxy Server Port

The port used by the proxy server.

Listener Port

The port used by the Listener.

SIP Domain

The domain in which the SIP connection is configured. The SIP domain must match the domain name of the connected proxy (that is the domain name in SIP URIs for incoming calls).

Maximum Simultaneous Calls

The maximum number of calls that this trunk can handle at one time.

Inbound Calls Allowed

The maximum number of simultaneous inbound calls allowed.

Outbound Calls Allowed

The maximum number of simultaneous outbound calls allowed.