Sample scenario for setting up SVN

Last Updated : Jul 28, 2021 |

Procedure

  1. Type change system-parameters security, and press Enter to open the Security-Related System Parameters screen.
  2. Enter y in the SVN Login Violation Notification Enabled field.

    This sets Security Violations Notification login violation notification.

    Note:

    If you are not using Security Violation Notification for logins, enter n in the SVN Login Violation Notification Enabled field and go to Step 6.

  3. In the Originating Extension field, enter 3040.

    This becomes the telephone extension for the purpose of originating and identifying SVN referral calls for login security violations.

  4. In the Referral Destination field, enter attd to send all calls to the attendant.

    This is the telephone extension that receives the referral call when a security violation occurs.

  5. Select Enter to save your changes.
    Note:

    If you are not using Remote Access, go to Step 9.

  6. (Optional) Type change remote-access and press Enter.
  7. (Optional) In the Disable Following A Security Violation field, type y.

    This disables Remote Access following detection of a remote access security violation.

  8. (Optional) Press Enter to save your changes.
  9. Type change station xxxx, where xxxx is the station to be assigned the notification halt button and press Enter.
  10. In the BUTTON ASSIGNMENTS section, type one of the following:

    • asvn-halt — The Authorization Code Security Violation Notification call is activated when an authorization code security violation is detected. This applies only if you are using authorization codes.

    • lsvn-halt — The Login Security Violation Notification call is activated a referral call when a login security violation is detected.

    • rsvn-halt — The Remote Access Barrier Code Security Violation Notification call is activated as a call referral. This applies only if you are using Remote Access barrier codes.

    • ssvn-halt — The Station Code Security Violation Notification call is activated when a station code security violation is detected. This applies only if you are using station codes.

    Note:

    Any of the above 4 security violations will cause the system to place a notification call to the designated telephone. The call continues to ring until answered. To stop notification of any further violations, press the button associated with the type of violation.

  11. Press Enter to save your changes.