Configuring the station

Last Updated : Oct 30, 2012 |

Procedure

  1. Enter add station n, where n is the extension.
  2. Ensure that the Type field is set to XMOBILE.
  3. Ensure that the XMOBILE Type field is set to IPDECT.
  4. Fill in the following fields:

    • Message Lamp Ext: Type the station number.

    • Display Module: y.

    • Message Waiting Type: ICON, DISP, or NONE depending on the MWI message requirement.

    • Length of Display: Type the proper length for each of the handset.

      Avaya recommends that the Length of Display field must be set to 16x2.

    • Mobility Trunk Group: Type the appropriate trunk group that use the H.323 signaling groups.

      Note:

      You must not change the value of the Mobility Trunk Group field while a call is active.

    • Mapping Mode: both.

  5. Select Enter to save your changes.