Enter change signaling-group n, where n is the signaling group number, for example, n = 18.
Set the Q-SIP field to y.
By default, the Q-SIP feature is disabled. The system displays this field only when the Group Type field is set to SIP or H.323.
In the SIP Signaling Group field, type a valid entry.
The valid entry must refer to an administered SIP signaling group. For example, if you have created SIP signaling group 17, the SIP Signaling Group field must refer to SIP signaling group 17. The system displays this field only when the Q-SIP field is set to y.
