Adding feature buttons

Last Updated : Aug 30, 2024 |

Procedure

  1. Log on to the Communication Manager System Access Terminal (SAT).
  2. In the command prompt, type change station nnnn. Where nnnn is the extension for the telephone to modify.
  3. Press Enter.
  4. In the Station screen, press Next Page until you locate the Button Assignment section.

    Some telephones have multiple feature button groups. Ensure that you are changing the correct button. If you do not know which button on the telephone maps to which button-assignment field, see your telephone manual.

  5. Enter the button name that corresponds to the feature to assign.

    To determine feature button names, press Help, or see Telephone Feature Buttons Table.

    Note:

    For certain newer telephones with expanded text label display capabilities, you can customize feature button labels to accept up to 13 alphanumeric characters. For more information about this feature, see the Increasing Text Fields for Feature Buttons section.

  6. Press Enter to save your changes.

    Some telephones have default assignments for buttons. For example, the 8411D includes defaults for 12 softkey buttons. It already has assignments for features like Leave Word Calling and Call Forwarding. If you do not use an alias, you can assign different features to these buttons for various requirements. If you use an alias, you must leave the default softkey button assignments. When you change the button assignments on the Station screen, the feature buttons work on the alias telephone, but the labels on the telephone display do not change.

Related information
Increasing Text Fields for Feature Buttons
Telephone feature buttons table