Setting Up Extension To Cellular Feature Access Button

Last Updated : Sep 26, 2023 |

About this task

Extension to Cellular provides the capability to administer an Extension to Cellular feature access button on the user’s office telephone to enable and disable the feature. You can also configure an optional timer. You administer this feature button on page 3 of the Station screen for the "host" office extension to which Extension to Cellular is linked. The process described below explains how to administer an Extension to Cellular feature button and include the optional Extension to Cellular timer. The Extension to Cellular feature button is available on telephones which support administrable feature buttons.

Procedure

  1. Type change station n, where n is the extension of an Extension to Cellular enabled station

    Type 1034.

  2. Press the Next Page button twice to display the Station screen (page 4).
  3. Select an available feature button under the BUTTON ASSIGNMENTS header (button 4 was used in this example) and type ec500 to administer an Extension to Cellular feature button on the office telephone.
  4. Press Enter.
    Note:

    The Timer subfield displays, and defaults to n. Leaving the default setting of n excludes the timer state

  5. Set the optional Timer subfield to y to include an Extension to Cellular timer state for the administered feature button

    When the timer state is included, the Extension to Cellular user can activate a one-hour timer to temporarily disable Extension to Cellular through this administered feature button.

  6. Press Enter.

    The corresponding feature button on the office telephone is now administered for Extension to Cellular.

    Note:

    The feature status button on the office telephone indicates the current state of Extension to Cellular regardless of whether the feature was enabled remotely or directly from the office telephone.

    For additional information, see the Avaya Extension to Cellular User Guide.