Detailed description of Administered Connections

Last Updated : Nov 21, 2022 |

Establish an AC between the following:

  • Two endpoints on the same Avaya Server

  • Two endpoints in the same private network, but on different servers

  • One endpoint on the controlling server and another endpoint off the private network

In all configurations, administer the AC on the server having the originating endpoint. For an AC in a private network, if the two endpoints are on two different servers, normally the connection routes via Automatic Alternate Routing (AAR) through tie trunks (ISDN, DS1, or analog tie trunks) and intermediate servers. If required, route the connection via Automatic Route Selection (ARS) and Generalized Route Selection (GRS) through the public network. The call routes over associated ISDN trunks. When the far-end answers, a connection occurs between the far-end and the near-end extension in the Originator field on the Administered Connection screen.

Because the system makes an administered connection automatically, you do not use the following:

  • Data Call Setup

    Do not assign a default dialing destination to a data module when it is used in an AC.

  • Data Hotline

    Do not assign a hotline destination to a data module that is used in an AC.

  • Terminal Dialing

    Turn off terminal dialing for data modules involved in an AC. This prevents display of call-processing messages (INCOMING CALL) on the terminal.