Enabling multiple locations for IP DECT

Last Updated : Oct 30, 2012 |

About this task

Important:

Perform this task only if you need to enable the multiple locations feature in Communication Manager system.

Procedure

  1. Enter display system-parameters customer-options.
  2. Click Next until you see the Multiple Locations field.
  3. Ensure that the Multiple Locations field is set to y.
    Note:

    If the Multiple Locations field is set to n, multiple locations is not enabled for the IP DECT feature. Go to the Avaya Support website at http://support.avaya.com for assistance.

  4. Select Enter to exit the screen.