Now set up a network region to show the connections between regions. You can begin with network region 1.
Procedure
Type change ip-network-region 1.
Press Enter.
The system displays the IP Network Region screen.
In the Name field, describe the region you are setting up.
In the Stub Network Region field, enter y if you are creating a stub network region or n if you are creating a core network region. For network regions 251 to 2000, this field is a read-only field and has a default value of y.
If you are creating a stub network region, then on page 4, in the dst rgn field, you must enter the number of the destination core network region that this stub network region connects to.
In the Codec Set field, type the codec set you want to use in this region.
In the UDP Port Range field, type the range of the UDP port number to be used for audio transport.
In the Intra-region IP-IP Direct Audio field, type y.
In the Inter-region IP-IP Direct Audio field, type y.
Go to page 4 to set up connections between regions and assign codecs for inter-region connections.
Page 3 of the IP Network Region screen shows a list of Survivable Remote Server for the network region.
The following connections are administered in this example.
codec-set 2 is used between region 1 and region 4
codec-set 5 is used between region 1 and region 99
codec-set 6 is used between region 1 and region 193
Endpoints registered will have a network map configured with a specified network region.
For more information, see Administering Network Connectivity on Avaya Aura®Communication Manager.
