Changing system parameters

Last Updated : Jul 10, 2014 |

About this task

You can modify the system parameters that are associated with some of the system features. For example, you can use the system parameters to play music if callers are on hold or to provide trunk-to-trunk transfers on the system.

Generally, Avaya sets your system parameters when your system is installed. However, you can change these parameters as your organizational needs.

As an example, to change the number of rings between each point for new coverage paths from 4 to 2 rings, complete the following steps:

Procedure

  1. Go to the administration interface.
  2. Enter change system-parameters coverage/forwarding.
  3. Press Enter.

    The system displays the System Parameters Call Coverage/Call Forwarding screen.

  4. In the Local Coverage Subsequent Redirection/CFWD No Answer Interval field, type 2.
  5. Press Enter to save your changes.

    Each telephone in a Call Coverage path now rings twice before the call routes to the next coverage point. The Local Cvg Subsequent Redirection/CFWD No Ans Interval field also controls the number of rings before the call is forwarded when you use Call Forwarding for busy/do not answer calls. This applies only to calls covered or forwarded to local extensions. Use Off-Net to set the number of rings for calls forwarded to public network extensions.