Adding feature access codes

Last Updated : Jul 10, 2014 |

About this task

As your requirements change, you might want to add a new set of FAC for your system. Before you can assign an FAC on the Feature Access Code screen, it must conform to your dial plan.

In the above example, if you want to assign a feature access code of 33 to Last Number Dialed, you need to first add a new FAC range to the dial plan.

Complete the following steps to add an FAC range from 30 to 39.

Procedure

  1. Go to the administration interface.
  2. Enter change dialplan analysis or change dialplan analysis location n, where n represents the number of a specific location. Press Enter.

    The system displays the Dial Plan Analysis screen.

  3. On the Dial Plan Analysis screen, move the cursor to an empty row.
  4. Type 3 in the Dialed String column, and then tab to the next field.
  5. Type 2 in the Total Length column, and then tab to the next field.
  6. Type FAC in the Call Type column.
  7. Press Enter to save your changes.