Allowing users to change coverage remotely

Last Updated : Oct 30, 2012 |

About this task

This section shows you how to allow users to change their call coverage path from a local or telecommuting (off-site) telephone.

Procedure

  1. Type change feature-access-codes.
  2. Press Enter.

    The system displays the Feature Access Code (FAC) screen.

  3. In the Change Coverage Access Code field, type *85.

    Use the *85 feature access code to change a coverage path from a telephone or remote station.

  4. Press Enter to save your changes.
  5. Type change cor.
  6. Press Enter.

    The system displays the Class of Restriction screen.

  7. In the Can Change Coverage field, type y.

    This permits users to select one of two previously administered coverage paths.

  8. Press Enter to save your changes.
  9. Type change station 1014.
  10. Press Enter.

    The system displays the Station screen for extension 1014.

  11. In the Security Code field, type 4196.

    In this example, this is your security code.

  12. In the Coverage Path 1 and Coverage Path 2 fields, verify that both are defined enabling your user to move from one coverage path to another.

    The t1 and t2 are the numbers of the Time of Day Coverage Tables.

  13. Press Enter to save your changes.