With your system located in New York and a remote user located in Germany, to create the correct time zone settings:
Procedure
Type change locations.
Press Enter.
The Locations screen displays.
In the Name field, enter the name of the location (for instance, Germany).
In the first Timezone Offset field, enter + to indicate the time is ahead of the system time.
In the second Timezone Offset field, enter 08 for the number of hours difference between this location and system time.
In the Daylight Saving field, enter 1 if this country has daylight saving.
Press Enter to save your changes.
Type change ip-network-map.
Press Enter.
The IP Address Mapping screen displays.
In the From IP Address field, enter the IP address for the remote station in Germany.
In the To IP Address field, enter the IP address of your system.
In the Subnet or Mask field, enter the subnet mask value of your network
In the Region field, enter a number that is not being used. In this example, enter 3.
Press Enter to save your changes.
Type change ip-network-region 3.
Press Enter.
The IP Network Region screen displays.
In the Name field, enter the location name for familiarity.
In the Location field, enter the number from the Locations screen. In this example, it was 11.
Press Next Page until you get to page 3, the Inter Network Region Connection Management screen.
Notice in the src rgn column that a 3 displays, and under dst rgn a 1, indicating that Network Region 3 (Germany) is connected to Network Region 1 (New York) using Codec Set 1.
Press Enter to save your changes
See Avaya Aura® Communication Manager Feature Description and Implementation for more information on the Multiple Locations feature.
