Using the Private Line Service feature, Communication Manager routes the incoming call to an endpoint using the private trunks assigned to that endpoint.
Incoming calls are routed to the endpoints using bridged appearances of the X-port.
Configure X-Port with the bridged appearances in Single Call Arrangement (SCA) mode on the endpoints for which you want to configure the Private Line Service feature. For more information, see Configuring XPORT 9408.
Log on to System Manager by using administrative credentials.
On the System Manager web console, navigate to Elements Communication Manager System.
Click Class of Restriction.
In the Class Of Restriction (COR) that you want to use, set the CALLING PERMISSION field for a specific COR to y.
ADDITIONAL INFORMATION:
The trunk group can route the incoming calls to the endpoint only if the updated COR with calling permissions enabled is assigned to the endpoint.
On the System Manager web console, navigate to Elements Communication Manager Network.
Click Trunk Group.
On the Trunk Group page, select the trunk group name for which you want to configure the private line service feature for routing the incoming calls to the endpoint.
On the Edit Trunk Group page, click the General Option (G) tab and do the following:
Assign the updated COR to the trunk group.
In the Group Type field, select CO to edit the CO trunk parameters.
In the TAC field, type the trunk access code of the CO trunk.
ADDITIONAL INFORMATION:
Device Adapter does not support special characters for the trunk access code, trunk access code must be a number.
In Incoming Destination field, type the X-port extension number or the range of extension numbers on which the incoming calls will be routed.
ADDITIONAL INFORMATION:
Bridged appearance for the private line key will be configured on these extensions for answering the incoming calls.
