Digital (including both 39xx and digital 200X phones)
2006, 2008
2216, 2616
3110, 3310, 3820
3901, 3902, 3903, 3904, 3905
Analog
All third-party dial pulse, 12 button DTMF analog phones, and analog phones with display.
Key Expansion Modules (KEM) and Graphic Expansion Modules (GEM)
UNIStim
24–key KEM for IP 200x series. Up to two KEMs can be connected that allow a phone to use 48 additional buttons. The maximum of 48 keys can be also achieved with a single KEM using the Shift key.
18–key KEM for i2050. Up to 3 KEMs can be connected that allow a phone to use 54 additional buttons.
18–key GEM for 11xx series. Max 3 GEMs with 18 buttons providing 54 extra keys. Can have 1 GEM and use the Shift button to allow 36 keys.
12–key GEM for 12xx series. Up to 4 GEMs are allowed, which provides 48 extra keys. Can have 1 or 2 GEM and use the Shift button to achieve the maximum of 48 keys.
Digital
22–key Add-on Module (AOM) for 2216 and 2616 phones. It contains a maximum of two modules.
22–key Key-Based Accessory (KBA) for 39xx series. It contains a maximum of two modules. This is functionally the same as the AOM for the 2216 and 2616 stations.
8–key Display-Based Accessory (DBA) for 39xx series. It contains a maximum of one module and up to 3 pages with 24 keys using the Shift key on DBA.
22–key KEM for European 3820 phone. It is functionally identical to AOM. The 3820 is a European equivalent of the 2616 station.
For more information about administrative screens, see Appendices. Although manual configuration is not required because the configuration is migrated by using ProVision.
Important:
Fax and modems are supported in the Device Adapter but fax is supported only in pass through mode. DSP MPT feature is used to increase fax reliability using the G.711 codec.
Device Adapter only supports the digital phones listed above. Other digital phones are not supported at this time.
Attendant consoles are not supported through Device Adapter. Customers should use attendant consoles supported by Avaya Aura®.
