IP phones Maintenance and Reports page command descriptions

Last Updated : Oct 24, 2019 |
This topic contains information about the IP phones maintenance commands that are available on the Maintenance and Reports page. The Maintenance and Reports page is available on the System Manager web interface in ElementsDevice AdapterIP PhonesMaintenance and Reports.
Prolog information
Metadata
Keywords:
Command name
Description
isetCount
Shows the total number of registered sets based on the query that you run.
isetFWGet
Shows a list of IP phones firmware based on the query that you run.
isetGet
Shows a list of IP phones based on the query that you run.
isetNATShow
Shows general information for all sets behind a NAT router or given IP | TN.
isetReset
Resets the registered IP set.
isetResetAll
Resets all registered IP sets.
isetSecGet
Shows a list of IP phones based on the query that you run.
isetSecShow
Shows UNIStim encryption related information for all registered sets or IP | TN.
isetSecShowByIP
Shows UNIStim encryption related information for all registered sets, sorted by IP.
isetSecShowByTN
Shows UNIStim encryption related information for all registered sets, sorted by TN.
isetSecUpdate
Re-configures S1/S2 ports and action bytes on the phones based on the query that you run.
isetShow
Shows general information for all registered sets or given IP | TN.
isetShowByIP
Shows general information for all registered sets, sorted by IP.
isetShowByTN
Shows general information for all registered sets, sorted by TN.
isetInfoShow
Shows the DHCP configuration and iset information for the specified IP set.
isetFWShow
Shows general information about firmware of all registered sets.
cookieRegShow
Shows the cookie registry information.
cookieShowByName
Shows the list of sets with a particular cookie set.
cookieShowByTN
Shows the cookie list for a set specified by TN.
dsetDelayHookswitchSet
Sets the Type value. For example, 2004P2, 2050PC, and 2004P1.

Maintenance

Command name
Description
disTPS
Line TPS gracefully switches the registered sets to the other servers located in the same cluster.
disiTPS
Line TPS gracefully switches the registered idle sets to the other servers located in the same cluster.
enlTPS
Enables the line TPS application and accepts set registrations.
itgAlarmTest
Generates ITGXXXX test alarms.
forcedisTPS
Forces to unregister all registered sets (on local server) and disables TPS.
loadBalance
Line TPS application attempts to balance the registration load of sets between this server and the rest of the cluster servers.
tpsSOCmdStatusShow
Shows the TPS Service Switch Over Command status.
echoServerShow
Shows general information about the Echo Servers that are used for NAT traversal feature, including the number of requests sent by this system.
elmShow
Shows the list of supported languages.
itgCardShow
Displays the card role, TLAN IP addresses, system information and location, status, and up time.
tpsInfoShow
Shows the status of the TPS.
tpsShow
Shows the TPS information.

Security

Command name
Description
tpsReloadCrls
Reloads the certificate revocation lists used by the TPS Service.
tpsShowCrls
Shows the certificate revocation lists used by the TPS Service.
csvReloadCrls
Reloads the certificate revocation lists used by the CSV Service.
csvShowCrls
Shows the certificate revocation lists used by the CSV Service.

Remote phone diagnostics

Command name
Description
eStatShow
Shows the Ethernet statistics for the specified IP set.
RTPStatShow
Shows the most recent RTCP statistics information for given IP | TN.
RTPTraceShow
Shows the RTCP statistics information periodically for the number of polling period. If this parameter is not specified, the default is until the end of the call.
RTPTraceStop
Stops the previously run RTPTraceShow command for an IP set.
rPing
Requests the IP set to ping an IP address. The count parameter of this command indicates the number of successful attempts the set should initiate.
rPingStop
Requests the specified IP set to stop pinging.
rTraceRoute
Requests the specified IP set to trace route an IP address.
rTraceRouteStop
Requests the IP set to stop tracing route an IP address.
RUDPStatShow
Shows RUDP/UNIStim statistics for specified IP set.

Firmware download

Command name
Description
umsPolicyShow
Displays the current upgrade policy.
umsUpgradeAll
Upgrades all registered sets according to the policy and firmware file at a given time. Example for time format is 14:00.
umsUpgradeTimerCancel
Cancels the scheduled upgrade.
umsUpgradeTimerShow
Shows the upgrade schedule.
umsCreatePolicy
Creates a new policy.
umsDeletePolicy
Deletes a policy.
umsSetPolicy
Assigns policy for the particular firmware.
umsSetPolicyProtocol
Sets protocol for a policy.
umsSetPolicyRetries
Sets the number of retries for a policy.
umsSetPolicyUpgradeType
Sets the upgrade type for a policy. Upgrade type can be: UPGRADE, DOWNGRADE, REFRESH, NEVER, FULLVERSION, and ANY.
uftpAutoUpgradeTimeoutSet
Sets a user response time out for postponed firmware upgrade.
uftpNodeShow
Shows the IP telephone firmware download summary of a node.
uftpRunTimeDataReset
Resets the run-time data field in the UFTP data block.
uftpShow
Shows the IP telephone firmware download information.
uftpSpeedLimitSet
Configures the bandwidth parameters for firmware download by using the UFTP protocol.
uftpSpeedLimitShow
Shows the current bandwidth parameters for firmware download by using the UFTP protocol.
uftpTurboModeShow
Shows the firmware download Turbo Mode information.
uftpTurboMode
Schedules the Turbo Mode.
uftpTurboModeTimeoutSet
Sets the firmware download Turbo Mode idle time out for this SS. It automatically exits the Turbo Mode if there are no active upgrade jobs during MM minutes.
Where SS and MM are the abbreviations from the following format:
Time Format
Template
Example
MTIME
 MM:SS.ss
91:17.01
TIME
hh:MM:SS.ss
01:31:17.01
DTIME
DD HH:MM:SS.ss
00 04:31:17.01

UNIStim

Command name
Description
usiGetPhoneRudpSettings
Gets the RUDP Max Retries Counts and RUDP Timeout values for all IP set types.
usiSetPhoneRudpRetriesByITType
Sets the RUDP Max Retries Count for IP sets of the specified \"SetType\" to [Value].
usiSetPhoneRudpTimeoutByITType
Sets the RUDP Timeout value for IP sets of specified \"SetType\" to [Value] in milliseconds.

Loss plan

Command name
Description
UKLossPlanClr
Sets the IP Phone's loss plan to default values.
UKLossPlanSet
Sets the IP Phone's loss plan to UK specific values.
lossPlanClr
Sets the IP Phone's loss plan to default values.
lossPlanPrt
Prints the offsets and current values for handset, headset, and handsfree RLR and SLR.
lossPlanSet
Adjusts the levels of a given transducer by using the given RLR and SLR offsets.