Configuring an endpoint for Hotline Intercom

Last Updated : Jun 09, 2021 |
Prolog information
Metadata
Keywords:
  1. To log on to System Manager, use administrative credentials.
  2. On the System Manager web console, navigate to ElementsCommunication ManagerEndpoints.
  3. Click Manage Endpoints.
  4. On the Endpoints page, select the endpoint for which you want to configure Hotline Intercom, and click Edit.
  5. On the Edit Endpoint page, on the General Options tab, in the Features field, configure the HTLI mnemonic for Hotline Intercom.
    ADDITIONAL INFORMATION:
    For example, LNA HFA HTLI2N2002F2002.
    You can configure the CLID filter in the HTLI mnemonic to auto-answer calls that have the matching CLIDs.
    If you do not configure the CLID filter, Device Adapter auto-answers all inbound calls.
    For more information about the HTLI mnemonic, see CS 1000 CoS and Avaya Aura feature field mapping.
  6. Click the Button Assignment tab and do the following:
    1. In the Button Label field, corresponding to the button number to configure as a Hotline Intercom number, type a name for the hotline intercom button label. For example, Hotline.
      ADDITIONAL INFORMATION:
      This label appears on the endpoint with the destination number.
      If you do not specify a label, the default label that appears on the endpoint is Hotline.
    2. In another Button Feature field, click brdg-appr.
    3. In the Button field, type the button appearance of the X-port where you want to bridge the call.
  7. In the Ext field, type the extension of the X-port where you want to bridge the call.
  8. Repeat Step 4 through Step 7 for the destination phone that you want to pair with this phone for Hotline Intercom.
  9. Click Commit.