Re-configuring TN data on endpoints

Last Updated : Jan 04, 2021 |
Prolog information
Metadata
Keywords:
During the migration from CS 1000 system to an Avaya Breeze® platform cluster, the nodes and terminal numbers can be changed. To configure multiple endpoints with new node and TN data, use the adaSetReconfigure command.
Use the remapping file which the ProVision tool creates during CS 1000 data migration.
Before you begin
Migrate CS 1000 system data to an Avaya Breeze® platform cluster with Nortel Migration Tool. For more information, see Starting Nortel Migration Tool and assigning a station type to the CS 1000 endpoints.
  1. Transfer the remapping file to the Avaya Device Adapter Snap-in master node using FTP.
    ADDITIONAL INFORMATION:
    The target directory on the master node is /home/cust directory.
  2. Run the following command on the master node to start re-configuring CS 1000 device TNs:
    ADDITIONAL INFORMATION:
    adaSetReconfigure enable /home/cust/<remapping file name>.txt
  3. Run the following command to view the re-configuration status:
    ADDITIONAL INFORMATION:
    adaSetReconfigure status
    STEP RESULT:
    You can view the remapping file name and the re-configuration status. The status can be ENABLED or DISABLED.
  4. Run the following command to stop re-configuring:
    ADDITIONAL INFORMATION:
    adaSetReconfigure disable
Related links
CS 1000 endpoints migration using ProVision and Nortel Migration Tool
Reverting endpoint reconfigurationReverting reconfiguration on a single endpointReverting exampleLoading an additional remapping fileRemoving a remapping file