AVAYA DOCUMENTATION CENTER
Find answers to your technical questions and learn how to use our products
Avaya Device Adapter Snap-in Reference
MG-XPEC installation
The CS 1000 documentation has detailed procedures to install the MG-XPEC. The Communication Server 1000E Installation and Commissioning guide for release 7.6 includes a section on replacing the XPEC (TDM interface) with MG-XPEC.
For more information, see the
Media Gateway Extended Peripheral Equipment Controller (MG XPEC)section in the Communication Server 1000E Installation and Commissioning guide. Specifically, the
Installation and Commissioningsection contains information about the process of connecting the cables and installing the circuit board. This explicitly requires NTDW26BAE6 to connect the new vintage of the NT8D22 XSM to the MG-XPEC.
The circuit card reference (Circuit Card Reference Avaya Communication Server 1000) for release 7.6 includes information about the settings of the switches on the cards.
-
For information about switch settings on the XSM, see
NT8D22 System Monitor
in Chapter 7: Option Settings. It also contains a short description about daisy chain of XSM cards. For more information about these settings along with additional details, see the Communication Server 1000M and Meridian 1 Large System Installation and Commissioning guide. -
For more information about MG-XPEC, see
Chapter 37: NTDW20 Media Gateway Extended Peripheral Equipment Controller card.
However, MG-XPEC is not configured by switches, so the reference is more for background information and information about the faceplate LED display rather than installation and commissioning.
The Communication Server 1000M and Meridian 1 Large System Installation and Commissioning guide for installation of large systems includes the procedure for the XSM.
-
Specifically, see the
Configuring the System Monitor
section for the procedure to configure the system monitor (XSM, NT8D22). This includes the settings of the different switches on the card.The following picture shows the back of the pedestal base after it is opened.
