The Limit Number of Concurrent Calls (LNCC) feature restricts the number of incoming calls to one call at a time. LNCC configuration on CS 1000 IP phones is similar to that of the configuration for SIP phones.
LimitInCalls is a new feature key that must be configured for the CS 1000 phones. Do the following to access the LNCC feature on the CS 1000 phones:
Log on to System Manager by using administrative credentials.
On the System Manager web console, navigate to ElementsCommunication ManagerEndpoints.
Click Manage Endpoints.
On the Endpoints page, select the CC endpoint for which you want to configure the login button, and then click Edit.
On the Edit Endpoint page, click the Button Assignment tab.
In the Button Feature field, select limit-call.
(Optional) In the Button Label field corresponding to the button number that you want to configure as a limit-call button, type a name for the limit-call label. For example, Limit-call.
ADDITIONAL INFORMATION:
This label appears on the endpoint.
If you do not specify a label, the default label that appears on the endpoint is LimitInCalls.
Press LimitInCalls button on the phone to activate the feature.
ADDITIONAL INFORMATION:
Note:
LNCC feature status - Limit In Call Activated, is displayed on the top line of the phone screen and through the feature key lamp to confirm that the feature is activated on the phone.
Press LimitInCalls button again on the phone to deactivate the future.
ADDITIONAL INFORMATION:
Note:
No feature status appears on the phone screen to confirm that the feature is deactivated on the phone.
